| Payment Type: | L/C,T/T,D/P,D/A,Paypal,Money Gram |
| Incoterm: | FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,Express Delivery,DAF,DES |
| Min. Order: | 50 Piece/Pieces |
| Transportation: | Ocean,Land,Air,Express |
Brand: Horse
Warranty Period: 3 Years
Certification: Csa, Pcoc, Reach, Iecee, Scoc
Support Customization: Oem, Odm
Place Of Origin: China
Use: Optical
| Selling Units | : | Piece/Pieces |
| Package Type | : | Plastic boxes |
Horse Optical Co., Ltd manufactures a variety of Beamsplitters suitable for use in precision optics.
Beamplitter Plates
Plate Beam Splitter consists of thin window. When using it, the two partial beams travel different optical paths. And the optical paths are decided on the thickness of plates and the incident angle. Beamsplitter plates can be used with high power lasers. When using beamsplitter plates, it is important to bear in mind that the two partial beams travel different optical paths. The optical paths depend on the incident angle and the thickness of the plates.
| ATTRIBUTE | SPECIFICATIONS |
| MATERIAL | N-BK7 or Specified |
| DIAMETER TOLERANCE | +0.1, -0.1mm |
| THICKNESS | +0.1, -0.1mm |
| PARALLELISM | < 3 arc minutes |
| CLEAR APERTURE | >90% |
| FLATNESS | λ/4 @ 632.8nm |
| SURFACE QUALITY | 40/20 scratch and dig |
| T/R | T=(Ts+Tp)/2, R=(Rs+Rp)/2 |
| BEVEL | < 0.2 mm x 45° |
| COATING | Beamsplitter coating on one surface and AR coating on the other |
| ATTRIBUTE | SPECIFICATIONS |
| MATERIAL | N-BK7 or Specified |
| DIAMETER TOLERANCE | +0.1, -0.1mm |
| FLATNESS | Per 25.4mm λ/4 @ 632.8nm |
| CLEAR APERTURE | >90% |
| SURFACE QUALITY | 40/20 scratch and dig |
| BEAM DEVIATION | <3 arc minutes |
| T/R | T=(Ts+Tp)/2, R=(Rs+Rp)/2 ±5% @ λ |
| COATING | BS coating on hypotenuse surface, and with AR coating on outside surfaces |
The Beamsplitter Penta Prism is composed of a Penta prism and a wedge. It can be used as a beam splitter, it is often used in plumb level surveying, Alignment, Range finding and optical tooling.
|
|
|
|
| +0.1, -0.1mm |
| ANGLE DEVIATION | +/-10" |
| FLATNESS | λ/4 @ 632.8nm |
| SURFACE QUALITY | 60/40 scratch and dig |
| COATING | With AR coating on outside surfaces Beam splitter coating on cementing surface Silver coating plus black paint on reflective surfaces |
Polarizing beamsplitter cubes split randomly polarized beams into two orthogonal, linearly polarized components: S-polarized light is reflected at a 90 deg angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of the prisms. A multi-layer antireflective coating has been applied to each face of the beamsplitter in order to produce maximum transmission efficiency.
| ATTRIBUTE | SPECIFICATIONS |
| MATERIAL | N-BK7 or Specified |
| DIAMETER TOLERANCE | +0.1, -0.1mm |
| FLATNESS | Per 25.4mm λ/4 @ 632.8nm |
| CLEAR APERTURE | >90% |
| SURFACE QUALITY | 40/20 scratch and dig |
| BEAM DEVIATION | <3 arc minutes |
| TRANSMISSION | Tp > 95% |
| REFLECTION | Rs > 99.5% |
| EXTINCTION RATIO | 1000:1 or better |
| COATING | PBS coating on hypotenuse surface, and with AR coating on outside surfaces |
Non-polarizing Beamsplitter Cube consists of a pair of precision high tolerance right angle prisms cemented together with a metallic-dielectric coating on the hypotenuse of one of the prisms. The low polarization dependence of the metallic-dielectric coating allows the transmission and reflection for S- and P- polarization states to be within 5% of each other. This means that they will not change the state of polarization of the incident beam.
| ATTRIBUTE | SPECIFICATIONS |
| MATERIAL | N-BK7 |
| DIAMETER TOLERANCE | +0.1, -0.1mm |
| BEAM DEVIATION | +/- 3 minutes |
| CLEAR APERTURE | >90% |
| FLATNESS | λ/4 @ 632.8nm |
| SURFACE FIGURE: IRREGULARITY(N) | <0.5 fringe |
| SURFACE QUALITY | 60/40 scratch and dig |
| BEVEL | < 0.3 mm x 45° |
| COATING | Non-polarization beamsplitter coating on hypotenuse surface, and AR coating on outside surfaces. |
| EXTINCTION RATIO | 46/46 +/-5%, │Ts - Tp│< 5%, │Rs - Rp│< 5% |
Tel: 0511-86503898
Whatsapp: +8613775341656
Address: No.12,Station Road, Development Zone, Danyang City, Jiangsu Province, China, Zhenjiang, Jiangsu China
Website: https://www.dyhorseoptical.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now